The successful bidder shall be responsible for
i) Supply of brand-new Bulk Milk Cooling Tanks of 3,000 Litres with Solidaridad's branding before or after installation.
ii) Supply of complete refrigeration systems including compressors, condensers, and refrigerant gas.
iii) Supply of control panels and all standard accessories.
iv) Delivery of equipment to site.
vi) Mechanical, electrical, and refrigeration installation.
vi) Testing and commissioning of the complete system.
vii) Demonstration of cooling performance.
viii) Training of client personnel.
ix) Provision of documentation, warranty, and after-sales support.
x) Provide capacity-building training for cooperative and factory staff on the proper operation, routine maintenance, and management of the cooling facility to ensure efficiency, product quality, and equipment durability.
4.1 Technical Specifications
Bulk Milk Cooler (BMC) – 3,000 Litres
4.1.1 Milk Tank Specifications for the 3,000Litre BMC
Item and specification
Working Capacity - 3,000 Litres
Gross Capacity - 3,300 Litres
Tank Design - Open, Cylindrical Horizontal
Material - Stainless Steel AISI 304 (Food Grade)
Inner Sheet Thickness - Min. 2.0 mm
Outer Sheet Thickness - Min. 1.5 mm
Surface Finish - 2B or equivalent
Evaporator - Laser welded pillow plate, SS 304
Agitator - 1 No., approx. 30 RPM
Insulation - Injected CFC-free PUF
Insulation Thickness - 50 mm (walls), 90 mm (bottom)
Insulation Standard - ISO 5708 2A II or equivalent
Volume Measurement - SS dipstick with calibrated chart
Supports - Adjustable stainless steel feet
4.1.2 Refrigeration System for the 3,000 Litre BMC
Item and Specification
Compressor Type - Scroll or equivalent
No. of Compressors - Two (2)
Condenser - Air-cooled
Refrigerant Gas - R404A or approved equivalent (to be supplied)
Ambient Design Temperature - 35°C
Cooling Time - ≤ 3.0 hrs (1st milking), ≤ 1.25 hrs (2nd milking)
Power Supply - 415V, 3 Phase
5.0 Common Accessories
- Refrigeration Control Panel with auto/manual operation, overload protection, and digital temperature display.
- CIP (Clean-in-Place) System, including:
- CIP spray ball
- Stainless steel piping (approx. 38 mm)
- Food-grade hose pipe – minimum 10 m
- Stainless steel dump/balance tank – approx. 200 L with sieve
- Milk Pump & Offloading System:
- Centrifugal milk pump, approx. 2 HP
- SS 304 construction
- Product offloading hose – approx. 38 mm, 10 Mtrs.
- Earthing:
- Pipe-type earthing
- Minimum four (4) earthing points
6.0 Installation, Testing & Commissioning
The supplier shall install the equipment on a foundation prepared by the client, complete all mechanical, electrical, and refrigeration connections, test the system for performance and safety, commission the equipment, and train designated client personnel.
7.0 Warranty & After-Sales Support
- Warranty Period:
- Two (2) years warranty on main equipment parts, including tank structure, compressors, evaporator, condenser, agitator assembly, and control panel.
- Consumables and spare parts are excluded from warranty, including seals, gaskets, sensors, refrigerant gas, hoses, and electrical consumables.
- Technical support shall be provided during the warranty period.
8.0 Delivery Timeline
The Bulk Milk Cooling Tanks are ex-stock and delivery shall be immediate upon receipt of a confirmed purchase order. The delivery, installation and testing should be finalized in 30 days maximum after signing of the contract.
9.0 Tender Compliance